Connect Communication Cable
Communication Cable
Use a standard RJ45/ T568B color code/ CAT5e Ethernet Cable(The maximum length is not more than 10 meters)
Connect
Connect the master battery C-up port to the BMS communication port on the inverter.
.
Battery setting (Inverter Protocol chosen by ADD)
Master battery
Slave battery
Inverter setting
Start from the main menu, click the marked buttons, and enter"battery setup"
Select "Batt Mode" to “Lithium ” and set the "Lithium" value to “00”.
Are all slave batteries dip switched to off as per the first slave?